Leave your demand so that we can get in touch with you sooner.
iTrans E100UC
18Gbps high bandwidth, HDMI V2.0.
HDMI video resolution up to 4K@60Hz 4:4:4, HDR10, Dolby Vision.
Supports HDCP bypass and HDCP 2.2
HDBaseT 3.0 solution which supports extending signal without compression.
Extends 4K or 1080p video signals to distances up to 328 feet (100 meters) over a single CAT6A cable.
Bi-directional IR, USB and RS232 pass-through control and Ethernet extension.
Supports bi-directional 24V PoC.
Supports audio de-embedding and ARC (Audio Return Channel).
Provides HDMI loop out on transmitter.
Support Touch control, USB camera, Microphone, Speakerphone.
Host Mode
BYOD PC or Dedicated Room PC mode connection, connect all VC devices at the RX side and control at TX side.
Device Mode
BYOD PC or Dedicated Room PC mode connection, connect all VC devices at the TX side and control at RX side.
Datasheet
| Model | iTrans E100UC | |
| Name | 18G HDMI Extender over HDBaseT 3.0 with USB 2.0 | |
| Transmitter | Receiver | |
| Input | (1) SOURCE | (1) HDBT IN |
| Input Connector | (1) Type-A female HDMI | (1) RJ45 |
| Input Resolution | Up to 4K@60Hz 4:4:4 | |
| Output | (1) HDBT OUT, (1) LOOP OUT | (1) DISPLAY |
| Output Connector | (1) RJ45, (1) Type-A female HDMI | (1) Type-A female HDMI |
| Output Resolution | Up to 4K@60Hz 4:4:4 | Up to 4K@60Hz 4:4:4 |
| Input | – | (1) ARC IN |
| Input Connector | – | (1) Toslink Connector |
| Output | (1) ARC OUT, (1) AUDIO OUT | – |
| Output Connector | (1) Toslink connector, (1) 3.5mm jack | – |
| Audio Format | Toslink (ARC): PCM, Dolby Digital, DTS 5.1CH 3.5mm Audio: PCM 2CH |
|
| Frequency Response | 20Hz ~ 20KHz, ±3dB | |
| Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal | |
| THD+N | < 0.05% (-80dB), 20Hz~20KHz bandwidth, 1kHz sine at 0dBFS level (or max level) | |
| SNR | > 85dB, 20Hz-20kHz bandwidth | |
| Crosstalk Isolation | > 70dB, 10kHz sine at 0dBFS level (or max level before clipping) | |
| L-R Level Deviation | < 0.3dB, 1kHz sine at 0dBFS level (or max level before clipping) | |
| Frequency Response Deviation | < ± 0.5dB, 20Hz – 20kHz | |
| Output Load Capability | 1KΩ and higher (Supports 10x paralleled 10KΩ loads) | |
| Stereo Channel Separation | >70dB@1KHz | |
| Control Part | (4) DEVICE, (1) HOST, (1) USB Switch, (1) IR IN, (1) IR OUT, (1) RS232, (1) ETHERNET | (4) DEVICE, (1) HOST, (1) ARC Switch, (1) USB Switch, (1) IR IN, (1) IR OUT, (1) RS232, (1) ETHERNET |
| Control Connector | (4) Type-A USB 2.0, (1) Type-B USB 2.0, (1) 2-pin DIP Switch, (2) 3.5mm Jacks, (1) 3-pin Terminal Block, (1) RJ45 | (4) Type-A USB 2.0, (1) Type-B USB 2.0, (2) 3-pin DIP Switch, (2) 3.5mm Jacks, (1) 3-pin Terminal Block, (1) RJ45 |
| Bandwidth | 18Gbps | |
| HDMI Standard | 2.0 | |
| HDCP Version | Input: HDCP 2.2, HDCP 1.4 compliant Loopout: Follows the display’s HDCP version. RX Output: Follows the source’s HDCP version. |
|
| CEC | Pass-through (when ARC switch is selected to PASS or SPDIF) | |
| Bi-directional PoC | Supported | |
| HDMI V2.0 Cable Length | 4K@60Hz 4:4:4 ≤ 5m, 4K@60Hz 4:2:0 ≤ 15m, 1080P ≤ 20m | |
| Transmission Standard | HDBaseT | |
| Transmission Distance | 4K/1080p ≤ 328 feet (100 meters) | |
| Operation Temperature | -5 to +55℃ (+23° to +131°F) | |
| Storage Temperature | -25 to +70℃ (-13° to +158°F) | |
| Relative Humidity | 10% to 90%, Non-condensing | |
| Power Supply | Input:100V~240V AC; Output:24V DC 1.25A | |
| Power Consumption | 17W (Max) | |
| Dimension (W*H*D) | 200mm x 25mm x 100mm(TX); 200mm x 25mm x 100mm(RX) | |
| Net Weight | 540g(TX), 540g(RX) | |
