Leave your demand so that we can get in touch with you sooner.
All Dante
The iTrans DX-T-22 Analog Adapters let you use your favorite analog audio gear with any Dante- connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost effective, compact and built for the road, it brings the modern network connectivity that every audio pro needs in their toolbox.
Analog Input
Connect legacy mixers and consoles to a Dante network.
Patch favorite DSPs, analog compressors and equalizers into a Dante system using a combination of Input and Output adapters.
Connect stage DI boxes and keyboard instruments directly to a Dante network.
Connect your wireless mic receiver to a Dante network
Datasheet
| Audio | |
| Max signal level | +24 dBu/+4 dBu/0 dBu 0 dBV/-10 dBV |
| Frequency Response | 20Hz to 20kHz(-/+0.5dB) |
| Impedance | 20k Ohm balanced 10k Ohm unbalanced |
| Dynamic Range | >100 dB |
| Signal-to-Noise Ratio | >100 dB |
| THD | <0.01% @+4 dBu |
| Dante | |
| Sample Rate | 44.1kHz, 48kHz, 96kHz |
| Bit Depth | 24 |
| Dante Device Latency | 1,2 or 5ms (configurable using Dante Controller) |
| Model Name | Analog 2X0 |
| General | |
| Operation Temperature | -5 to +55℃ (+23° to +131°F) |
| Storage Temperature | -25 to +70℃ (-13° to +158°F) |
| Power | 802.3af PoE |
| Power Consumption | 3.15W(Max) |
| Dimension (W*H*D) | 30 x 28 x 114 mm |
| Cable length | 300mm |
| Net Weight | 145g |
