INFOBIT iSwitch JPEG 2000 AV over IP 4K

iSwitch 2000: 4K60 JPEG 2000 AV over IP
HDMI 2.0b, HDCP 2.2 compliant, 18Gbps video bandwidth. Input up to 4K60 4:4:4, output up to 4K30 4:4:4
Transmit video, audio, IR, RS-232, CEC, and USB signals over Ethernet
Supports both unicast and multicast functions
Supports point-to-point, video matrix, and video wall functions (video wall up to 9x9)
Screen Group management
JPEG2000 Main Stream and standard H.265 codec Secondary Stream (SS)
Support Secondary Stream VLAN tagging and parameters configuration
Support 1G Ethernet Switch
Support POE
Flexible control through Web GUI/TCP/RS-232/IR and third-party controller
Smart networking design for easy and flexible installation.


iSwitch AV over IP products are a direct replacement for AV Matrix (HDbaseT) solutions. Leverage IP infrastructure to route AV signals in offices, huddle rooms, conference rooms, or as content contribution (trunking) between locations. True plug-and-play, no need any IP settings.


iSwitch efficiently deliver high-quality, low latency, AV to many displays on a floor, between floors, or across the entire organization.

Many-to-One Switching

iSwitch lets you take content from multiple encoders and deliver it to one decoder connected to the same managed Ethernet switch.

Many-to-Many Video Wall

iSwitch include video wall processing that allows encoded AV content to be presented across an array of displays.

Many-to-Many Matrix Switching

Digital signage systems are usually asymmetrical – a few sources feeding a large number of destinations.
iSwitch simply integrates decoder and network drop for each display.

Preview Source

With preview of all signal content.

Support portrait layouts

It supports 90°, 180°, 270° screen installation.


HDMI Compliant HDMI 2.0b
HDCP Compliant HDCP 2.2
Video Bandwidth 18Gbps
Video Compression Standard JPEG2000
Video Network Bandwidth 1G
Video Resolution 480i ~1080p@50/60Hz, 4K@24/30Hz, support 4K@50/60Hz input
Color Depth 8/10/12-bit
Color Space RGB, YCbCr 4:4:4 / 4:2:2, YUV 4:2:0
HDMI Audio Formats LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD Master, DTS:X
Transmission Distance 100M CAT5E/6/6A/7
IR Level 12Vp-p
IR Frequency Wideband 20K – 60KHZ
ESD Protection Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Encoder Input: 1×HDMI Type A [19-pin male]
1x L/R Audio IN [3.81mm Phoenix connector]
1x IR IN [3.5mm Audio Jack]
Output: 1×HDMI Type A [19-pin male]
1x L/R Audio OUT [3.81mm Phoenix connector]
1x IR OUT [3.5mm Audio Jack]
Control: 1x RS-232 [3.81mm Phoenix connector] 1×LAN [RJ45 jack] 1×USB [USB TypeB]
Decoder Input: 1x IR IN [3.5mm Audio Jack]
1x L/R Audio IN [3.81mm Phoenix connector]
Output: 1×HDMI Type A [19-pin male] 1x IR OUT [3.5mm Audio Jack]
1x L/R Audio OUT [3.81mm Phoenix connector]
Control: 1×LAN [RJ45 jack] 2×USB1.1 [USB-A male]
2×USB2.0 [USB-A male]
1x RS-232 [3.81mm Phoenix connector]
Dimensions 204mm [W] x 100mm [D] x 21.5mm [H]
Weight TX:509g, RX:496g
Power Supply Input: AC100 – 240V 50/60Hz Output: DC 12V/1A (US/EU standards, CE/FCC/UL certified)
Power Consumption Encoder: < 8W, Decoder: < 4W
Resolution / Cable Length 4K60 -16ft / 5M; 4K30 -32ft / 10M; 1080P60 -50ft / 15M


  • iSwitch 2000 Datasheet_V1.0.pdf

    0.3M 27-07-2022
  • iSwitch 2000C_Controller User Manual_V1.0.pdf

    3.08M 27-07-2022
  • iSwitch 2000 User Manual_V1.0.pdf

    1.07M 27-07-2022
  • iSwitch 2000-iSwitch 265 Control Commands V1.0.pdf

    0.08M 27-07-2022

Leave A Message

Leave your demand so that we can get in touch with you sooner.