- Dante 2CH digital audio and Line balanced analog level inputs
- Dante 2CH digital audio, Line-balanced analog level and AMP outputs
- Built-in audio DSP processor, excellent signal-to-noise ratio, and ultra-low distortion rate
- Switching between Lo-Z and Hi-Z can be achieved to adapt to various types of speaker installation.
- In Lo-Z output mode, single channel 150W 8 Ω or dual channel 75W 4Ω/8Ω can be selected.
- In Hi-Z output mode, single channel 150W to 70V/100V can be provided.
- Independent input gain, output EQ and volume control
- 48KHz sampling rate, 24bit independent A/D and D/A converters
- 2x75W AMP out supports 4Ω/8Ω/70V/100V speaker
- 5-12V trigger input
- Auto standby
- Flexible control via RS-232, LAN and Web GUI
Audio Distribution
Power Amplifier
-
iSound PAD150 150W Class D Amplifier with DSP and DanteDante 2CH digital audio and Line balanced analog level inputsDante 2CH digital audio, Line balanced analog level and AMP outputsBuilt-in audio DSP processorSwitching between Lo-Z and Hi-ZFlexible control via RS-232, LAN and Web GUI
-
iSound PA20 Dual 20W Audio Amplifier
2 x 20 Watt @ 4 0hm
1 x 40 Watt @ 8 0hm
Two stereo audio inputs, switchable by panel button, IR remote and RS232
Volume / Bass / Treble controllable by panel buttons IR remote and RS232
Balanced/unbalanced signal and suppresses the external noise effectively. Line audio output via 3.5mm jack, with controllable volume
Dual-mono up the stereo audio to two times mono audio. MIC mixer function1) 2 x 20 Watt @ 4 0hm as the default amplifier output2) 1 x 40 Watt @ 8 0hm by bridge connection3) Two stereo audio inputs, switchable by panel button, IR remote and RS2324) Volume / Bass / Treble controllable by panel buttons IR remote and RS2325) Can daisy-chain multiple units