INFOBIT iTrans E100K HDBaseT extenders

18Gbps HDMI over HDBaseT Extender with Bi-directional IR (100M)

HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant

Support 18Gbps video bandwidth

Video resolution is up to 4k2k@60Hz YUV 4:4:4

The maximum transmission distance is 328ft / 100 meters via a single CAT6a/7 cable

Support ARC (Audio Return Channel) function

With bi-directional IR, RS-232 and CEC pass-through

Support USB KVM function

HDR, HDR10+, Dolby Vision and HLG function supported

Supports PoC (Power over Cable) function

Compact design for easy and flexible installation.

* The Rx works with INFOBIT iTrans WP210-T

18Gbps HDMI Extender w/ KVM

This 18Gbps HDMI Extender can extend high-definition video / audio signal, RS-232, bidirectional IR and internet signal, at the distance of up to 328ft / 100 meters between transmitter and receiver via a single CAT6a/7 cable and support resolution up to 4K2K@60Hz 4:4:4. The transmitter supports ARC function and local audio extract.

In addition, the extender is equipped with bi-directional IR pass-through which allows for source and display control. It also supports USB KVM and PoC function.

4K60 over Category Cable

The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25ft/8m.
Additionally, HDMI connectors can only be terminated in specialized factory environment due to its extremely
high frequencies and high density. This does not allow installers or users to remake or make cables on a DIY basis.
CAT-6A cables are available widely and can be reworked easily by the installer or end-user to transmit the 4K60 video over 100m.

Simple Power

No need to power at both Tx and Rx ends when you use the infobit E150CG extender.
Power is provided by ultra-stable PoC (power over cable) technology.
Optionally you can power it locally either at the wall plate side or HDBaseT Receiver side.

In-wall solution for your tidy wiring

Save space and make a squeaky-clean installation with the 2-gang wall plate (iTrans WP210-T).
This wall plate fits in more places than ever, it’s perfect for mounting in a wall, on a desk or podium top,
or any other place where you need a solid and sleek HDMI connection

Diagram

INFOBIT iTrans E100K HDBaseT extenders

Datasheet

HDCP Compliance HDCP 2.2 / HDCP 1.4 
Video Bandwidth 18Gbps 
Video Resolution  4K2K 50/60Hz 4:4:4
4K2K 50/60Hz 4:2:2
4K2K 50/60Hz 4:2:0
4K2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p, 480i
All PC resolutions including 1920 x 1200 
Color Space RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0 
Color Depth  8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr
4:2:2/4:2:0) 8-bit (4K60Hz 4:4:4 ) 
HDMI Audio Formats  LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby
TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS
HD Master, DTS HD-HRA, DTS-X 
L/R Audio Formats PCM 2.0 
SPDIF Audio Formats LPCM2.0, Dolby Digital, Dolby Digital Plus, DTS
ESD Protection Human body model — ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Transmitter  Inputs: 1x HDMI Type A [19-pin female]
Outputs: 1x HDBT OUT [RJ45, 8-pin female]
 1x SPDIF OUT [S/PDIF]
 1×L/R OUT [3.5mm Stereo Mini-jack]
 1×LAN [RG45]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
 1x IR OUT [3.5mm Stereo Mini-jack]
 1x RS-232 [Phoenix jack]
 1x SERVICE [Mini-USB, Update port]
 1×USB HOST [USB Type B ]
Receiver Inputs: 1x HDBT IN [RJ45, 8-pin female]
 1x SPDIF IN [S/PDIF]
Outputs: 1x HDMI Type A [19-pin female]
 1x LAN [RG45]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
 1x IR OUT [3.5mm Stereo Mini-jack]
 1x RS-232 [Phoenix jack]
 1x SERVICE [Mini-USB, Update port]
 2×USB 2.0 [USB Type A]
Dimensions  Transmitter / Receiver: 165mm [W] x 88mm [D] x 18mm [H] 
Weight Transmitter: 170g, Receiver: 165g
Power Supply Input: AC 100 – 240V 50/60Hz
Output: DC 24V/1A (Locking connector) 

Download

  • INFOBIT iTrans E100K Datasheet V1.0.pdf

    0.21M 17-11-2021
  • INFOBIT iTrans E100K_User Manual_V1.0.pdf

    6.17M 17-11-2021

Leave A Message

Leave your demand so that we can get in touch with you sooner.

Sales Enquiry