Leave your demand so that we can get in touch with you sooner.
iSpeaker DAP6
1. Built-in amplifier module, digital signal processing.
2. Support for POE power and Dante transmission, single channel, 60W@4 ohms.
3. The PoE module uses the Dante™ network protocol, 24-bit high quality audio (44.1K/48KHz) and control signals can be sent via Dante™ and controlled by the Dante™ Controller.
4. The module has an integrated DSP containing gain control, mute control, level, temperature display, 5-band equaliser, and limit control functions.
5. All functions are fully process-controllable from the Dante Controller on PC or Mac.
Meeting Rooms
Datasheet
| Model | iSpeaker DAP6 |
| Name | Dante Active Speaker 6” |
| Technical | Bass 6.5-inch x1, treble 1-inch imported magnesium film + horn drive |
| Sensitivity | 92dB (1w@1m) |
| Output power | 15.4-30W |
| (Determined by PoE output) | |
| Maximum sound pressure | 118dB |
| Power | 60W |
| Impedance | 8Ω |
| Vertical coverage | 60° |
| Horizontal coverage | 90° |
| Frequency Response Range | 70 Hz-21kHz |
| Interface | RJ45 |
| Transmission protocol | Dante |
| Power supply method | PoE power supply |
| DSP processing | support |
| Installation | Bring your own hangers |
| Net weight | 4.1 Kg |
| Speaker size | 197mm X 300mm X 118mm |
