iTrans WP210-T HDBaseT Wall Plate transmitter

The infobit HDBaseT Wall Plate (WP210-T) is an intelligent integrated transmitter. It supports one HDMI 2.0 18Gbps input, one VGA with audio input, bi-directional IR and uni-directional USB signals. Uncompressed video, audio and control signals can be transmitted by using HDBaseT technology through a single Cat5 /6/6a cable up to 230ft /70 meters (1080p) or 130ft/ 40 meters (4K60). Simplify installations in schools, offices, meeting rooms and huddle rooms.

HDMI 2.0, 18Gbps, HDCP 2.2, HDBaseT, 1080p 70m, 4K60Hz 4:4:4 40m

Note: Receiver (model iTrans E100K-R) is not included, must be purchased separately.

In-wall solution for your tidy wiring

Save space and make a squeaky-clean installation with the 2-gang wall plate.
This wall plate fits in more places than ever, it’s perfect for mounting in a wall,
on a desk or podium top, or any other place where you need a solid and sleek HDMI connection.

UHD over Category Cable

The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25ft/8m.
Additionally, HDMI connectors can only be terminated in specialized factory environment due to its extremely high
frequencies and high density.
This does not allow installers or users to remake or make cables on a DIY basis.
CAT-6A cables are available widely and can be reworked easily by the installer or end-user.

Long Distance Transmission

By using infobit-WP210-T, the transmission distance for HD 1080P is 70 meters (230ft) & 4K/60Hz is up to 40 meters (130ft).

Simple Power

No local power required at the wall plate side when you use the infobit-WP70-T.
Power is provided by ultra-stable PoC (power over cable) technology.
Optionally you can power it locally either at the wall plate side or HDBaseT Receiver side.

Auto Sensing

This wall plate is designed to be a "Set it & forget it" piece of hardware. When the user plugs in their device,
the wall plate automatically senses the signal and makes it active.
With indicator lights on the face of the wall plate you know
whether or not you have a solid connection or not.

Diagram

iTrans WP210-T HDBaseT Wall Plate transmitter

Datasheet

Models Compare WP70-T WP210-T WP200-Kit
Type 1-Gang US Decora 2-Gang US Decora 1x WP200T Wall Plate (US 2-Gang) Tx; 1x WP200R receiver, 1x WP200C control panel
Distance 4K60Hz 4:4:4 40m/130ft; 1080p 70m/230ft 4K60Hz 4:4:4 40m/130ft; 1080p 70m/230ft 4K30Hz 4:4:4 40m/130ft; 1080p 70m/230ft
HDMI HDMI 2.0b, 18 Gbps HDMI 2.0b, 18 Gbps HDMI 1.4b, 10.2 Gbps
HDCP HDCP 1.4 and HDCP 2.2 HDCP 1.4 and HDCP 2.2 HDCP 1.4 and HDCP 2.2
POC (Power Over Cable) Yes Yes Yes
Bi-directional IR and RS232 Yes Yes Yes
HDMI Video Resolution 4K/60Hz (YUV4:4:4), 4K/30Hz, 1080P/120Hz, and 1080P 3D/60Hz  4K/60Hz (YUV4:4:4), 4K/30Hz, 1080P/120Hz, and 1080P 3D/60Hz  4K30Hz, 1080p
VGA resolution No VGA 1080p/60Hz, with scalling 1080p/60Hz, with scalling
Control panel Without Without Yes
Web GUI control No No Yes
Whiteboard Touch No No Yes
HDMI Audio Formats  LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD, Dolby, DTS
Transmitter I/O Inputs:
1x HDMI Type A, 19-pin female; 1x IR INPUT, Phoenix jack; 1x RS-232, Phoenix jack;
Outputs:
1x HDBaseT Out, RJ45; 1x IR OUT, Phoenix jack; 1x RS-232, Phoenix jack; 
Inputs:
1x HDMI Type A, 19-pin female; 1x VGA; 1x USB-B; 1x IR IN, Phoenix jack; 1x RS-232, Phoenix jack; 1×AUDIO IN, 3.5mm Stereo Mini-jack.
Outputs:
1x HDBaseT Out, RJ45; 1x IR OUT, Phoenix jack;
Inputs:
2x HDMI IN Type A, 19-pin female; 1x VGA, DB15 VGA female; 1x AUDIO IN, 3.5mm Stereo Mini-jack; 1x RS-232/POWER, RJ45;
Outputs:
1x HDBaseT Out, RJ45
Receiver I/O Receiver not included, infobit HDBaseT extender can be purchased separately. Receiver not included, infobit HDBaseT extender can be purchased separately. Inputs:
1x 3PIN MIC/line; 1x USB-A; 1x TCP/IP; 1x USB-A; 1x HDBaseT, RJ45;
Outputs:
1x HDMI OUT  Type A,19-pin female; 1x RS-232; 1x RELAY, Screw Terminal; 1x 2x30watts/4 ohms amplifier output
Net Dimensions WHD: 103.5mm x 30mm x 46mm WHD: 91.8mm x 43mm x 104.8mm Transmitter: WHD 115.9mm x 38.7mm x 114.3mm
Receiver: WHD 250mm x 30mm x 104mm
Control Panel: WHD 69.9mm x 22.2mm x 114.3mm 
Net Weight 163g 212.5g Transmitter: 305g; Receiver: 790g; Control Panel: 180g
Power Supply Input: AC100 – 240V 50/60Hz
Output: DC 24V/1A (US/EU standards, CE/FCC/UL certified)
Input: AC100 – 240V 50/60Hz
Output: DC 24V/1A (US/EU standards, CE/FCC/UL certified)
Input: AC100 – 240V 50/60Hz
Output: DC 24V/1A (US/EU standards, CE/FCC/UL certified)
Power Consumption  9W 6W 75W
Operation Temperature 32 – 104°F / 0 – 40°C 32 – 104°F / 0 – 40°C 32 – 104°F / 0 – 40°C
Storage Temperature -4 – 140°F / -20 – 60°C -4 – 140°F / -20 – 60°C -4 – 140°F / -20 – 60°C
Relative Humidity 20 – 90% RH (non condensation) 20 – 90% RH (non condensation) 20 – 90% RH (non condensation)

Download

  • WP210-T Wall Plate User Manual_V1.0

    0M 28-06-2020
  • INFOBIT wall plate- datasheet_V1.0

    0M 27-01-2021
  • Dimension-WP210T_ V1.1

    0M 24-09-2021

Leave A Message

Leave your demand so that we can get in touch with you sooner.