1- HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant
2- Video resolutions up to 4K2K@50/60Hz (YUV444)
3- 10bits HDR (High Dynamic Range) pass through
4- Supports HDMI High Bit Rate(HBR) audio pass through
5- Supports CEC bypass
6- Optical audio supports LPCM 2CH, Dolby Digital 2/5.1CH, DTS 2/5.1CH
7- POC (Power Over Cable) function is supported, either TX or RX is powered by 24V@1A power supply, the another does not need power
supply from the DC jack. POC Power consumption is less than 10W.
8- Transfer Bidirectional Infrared control signal together with the HDMI signal.
9- Transfer Bidirectional RS-232 control signal together with the HDMI signal.
10- Transmission distance: 70 meters 1080P @60Hz; 40 meters 4K2K@50/60Hz (YUV444)

1- Compliant with HDCP 2.3, 18Gbps video bandwidth
2- HDBaseT 3.0 VS3000 chipset based design
3- Support video resolution up to 4K2K@60Hz (YUV 4:4:4) as specified in HDMI 2.0b
4- 4K60/4K30/1080P signal transmission distance up to 328ft/100m via a single CAT6A/7 cable (HDBT Standard Mode)
5- 1080P 8bit signal transmission distance up to 492ft/150m via a single CAT6A/7 cable (HDBT Long Reach Mode)
6- TX features with 1x HDMI input, 1x USB-C input, 1x HDBT output, 1x USB 2.0 host and 3x USB 2.0 clients
7- RX features with 1x HDMI output, 2x USB 2.0 clients
8- USB-C and HDMI signal inputs support auto or manual switching mode
9- Auto switching supports HDMI 5V or signal detect selection
10- USB-C supports DP-ALT mode for A/V, USB 2.0 data and power charging up to 60 watts
11- TX/RX USB-A client ports VBUS on or off depends on USB host is connected or not
12- HDR, HDR10, HDR10+, Dolby Vision LLM and HLG pass-through
13- 4K to 1080p downscaling features on HDMI output, no frame rate conversion
14- Both TX and RX support analog audio de-embedding
15- Support bi-directional IR signal pass-through, USB 2.0 signal transmission
16- Advanced EDID management
17- Each USB-A port provides power up to 5V/500mA
18- Support bi-directional 24V POC, with POC switch
19- RS-232 signal pass-through and guest-mode control

1 HDMI input and 1 HDBaseT input.
The HDMI output resolution can be selected from 720p to 4Kx2K @60Hz 4:4:4 to assure preferred output.
HDMI signals transmission up to 70m at 4K and 100m at 1080p on HDBT input.
Output resolutions are selectable to assure the preferred output
Support various output resolutions, such as 4Kx2K@60Hz, 4Kx2K@30Hz, 1920x1080p@60Hz, 1280x720@60Hz and more.
Supports RS232 pass-through to communicate control signal between the scaler and the connected HDBaseT matrix.
Controllable via RS232 local and pass-through, IR local and pass-through.
The receiver can be powered by the connected HDBaseT matrix via PoC.
Supports advanced built-in EDID management.

The infobit 10.2Gbps HDMI 70m extender adopts HDBaseT technology to transmit HDMI and bi-directional broadband IR signals over to 70 meters (70m for 1080p, 40m for 4K/30Hz) through Cat 5e/6 cable. It supports bi-directional IR and RS232 to control the source device or display from the remote end.

This product can be widely used in video conference, multimedia signal broadcasting, and HDMI signal extension, etc.

HDMI 1.4, 10.2Gbps, HDCP 2.2, HDBaseT, 1080p 70m, 4K30Hz 4:4:4 40m

POC (Power Over Cable) function is supported, either TX or RX is powered by24V@1A
Power consumption is less than 10W.
UTP termination follows the standard of the direct interconnection method.
Transmission distance: Over CAT6 cable
70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D 1080P@60Hz@36bit; 4K x 2K@30Hz@24bit.
Support display resolutions up to 4K x 2K@30Hz
Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit
Bidirectional Infrared control signal
Bidirectional RS232 control signal

HDMI 2.1, HDCP 2.3 and HDBaseT 3.0
Up to 40Gbps FRL and 18Gbps TMDS video bandwidth
Up to 8K@30 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
Support VGA-WUXGA and 480i-8K30
VRR, FVA, ALLM support
HDR, HDR10, HDR10+, Dolby Vision and HLG pass-through
HDMI audio formats: Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Up to 90m/295ft via a single CAT 6A/7 cable
Support eARC/ARC from RX to TX sound system
Advanced EDID management through EDID DIP switch
With CONFIG DIP switch, allowing the RS-232 serial port to feature different functions
Support USB2.0 transmission (with speeds up to 350Mbps), Host/Device is configurable
Works with VC devices like camera, microphone, touch screen, speakerphone and other USB devices
Bi-directional Ethernet (1Gb), analog audio, IR & RS-232 signal pass-through
HDMI re-clocking on the HDBaseT™ Receiver to help solve HDMI HDCP, compatibility and handshaking issues
Bi-directional 24V POC

18Gbps high bandwidth, HDMI V2.0.
HDMI video resolution up to 4K@60Hz 4:4:4, HDR10, Dolby Vision.
Supports HDCP bypass and HDCP 2.2
HDBaseT 3.0 solution which supports extending signal without compression.
Extends 4K or 1080p video signals to distances up to 328 feet (100 meters) over a single CAT6A cable.
Bi-directional IR, USB and RS232 pass-through control and Ethernet extension.
Supports bi-directional 24V PoC.
Supports audio de-embedding and ARC (Audio Return Channel).
Provides HDMI loop out on transmitter.

18Gbps HDMI over HDBaseT Extender with Bi-directional IR (100M)

HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant

Support 18Gbps video bandwidth

Video resolution is up to 4k2k@60Hz YUV 4:4:4

The maximum transmission distance is 328ft / 100 meters via a single CAT6a/7 cable

Support ARC (Audio Return Channel) function

With bi-directional IR, RS-232 and CEC pass-through

Support USB KVM function

HDR, HDR10+, Dolby Vision and HLG function supported

Supports PoC (Power over Cable) function

Compact design for easy and flexible installation.

* The Rx works with INFOBIT iTrans WP210-T

HDMI 2.0b, HDCP 2.2, and HDBaseT 3.0 compliant
Uncompressed 4K@60Hz 4:4:4 up to 18Gbps video bandwidth
HDR, HDR10, HDR10+, Dolby Vision, and HLG pass-through
LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD pass-through
Transmission distance up to 328ft/100 meters via a single CAT 6A/7 cable
Supports eARC/ARC function (the audio is returned to the HDMI IN port, HDMI OUT(AUDIO ONLY) port, and SPDIF OUT port of the transmitter.)
Supports SPDIF audio reverse transmission
Bi-directional IR, RS-232, and 1G Ethernet signal pass-through
Supports USB2.0 transmission, Host/Device is configurable
Bi-directional 24V POC function

The HDMI Extender with Loopout can extend HDMI signal over 500 feet/150 meters to an HDMI compatible display via single Cat5e/6 cable. It also supports bi-directional Infrared control signal and RS-232 transmission together with HDMI signal, it can allow you to easily control your DVD player at TV side or control your TV at the DVD player side when using this extender.

HDMI 1.4, 10.2Gbps, HDCP 1.4, HDBaseT, 1080P/60Hz 150m

This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. It supports resolution up to 4K2K@60Hz 4:4:4, 18Gbps and HDCP 2.2. One HDMI loop port is available for output. It also supports de-embeded audio for L/R audio output and PoC function. In addition, the extender is equipped with two-way IR pass-through which allows for source and display control.

HDMI 2.0, 18Gbps, HDCP 2.2, HDBaseT, 1080p 150m, 4K60Hz 4:4:4 120m, HDR

HDMI 2.0b and HDCP 2.2 compliant
Support 18Gbps video bandwidth
Up to 4K2K@60Hz YUV 4:4:4
Up to 492ft / 150m for 1080P@60Hz, or 394ft / 120m for 4K2K@60Hz 4:4:4 via a single CAT6 cable
Support bi-directional IR signal and USB KVM signal pass-through
Support bi-directional POC (Power over Cable) function
Support USB 2.0 transmission
EDID management
Compact design for easy and flexible installation

HDMI2.0b, HDCP 2.2 and USB 1.1 compliant

Support 18Gbps video bandwidth

Support video resolution up to 4K2K@60Hz YUV 4:4:4

The transmission distance can be extended up to 492ft / 150m at the resolution of 1080P@60Hz, or 394ft / 120m at 4K2K@60Hz 4:4:4 via a single CAT6 cable

Support bi-directional IR signal and USB KVM signal pass-through

Support bi-directional POC (Power over Cable) function

Compact design for easy and flexible installation