iSwitch-402UC - -B
iSwitch 402UC

4K60 4x2 UC Switcher with Dante

iSwitch 402UC
iSwitch 402UC
iSwitch 402UC
iSwitch 402UC
iSwitch 402UC
iSwitch 402UC
iSwitch 402UC
iSwitch 402UC
iSwitch 402UC

4K Video: resolutions up to 4K60Hz 4:4:4.

4×2 conference presentation switch, integrating video, audio, USB, control, and Ethernet.

Dual USB-C and dual HDMI + USB Host inputs.

Full-featured USB-C inputs, supports 4K video, USB 3.2 data, USB ethernet, and 60W charging.

Supports automatic switching, USB and video independent switching, priority switching, and other switching methods.

With four USB 3.2 device ports for connecting conference equipment, such as cameras and speakerphone.

With 100m HDBT 3.0 output for video and USB extension.

Bi-directional RS232

GPIO, RELAY, and OCS Sensor

Each input port provides an independent USB to Ethernet bridge.

Provides two independent RJ-45 ports for ethernet switch or VLAN Setting.

Supports one RJ-45 port for 2×2 Dante.

Supports ethernet control, and multiple simultaneous TCP/IP.

IT security: supports HTTP and HTTPS and supports 802.1x authentication.

iSwitch 402UC
iSwitch 402UC
iSwitch 402UC
iSwitch 402UC
 4K60 4x2 UC Switcher with Dante
4K60 4x2 UC Switcher with Dante
The iSwitch 402UC (TX) is a 4x2 conference presentation switcher, it is specially designed for conference room scenarios,
featuring various models and specifications to meet diverse user needs.
 With HDBaseT Receiver
With HDBaseT Receiver
The iSwitch 402UC (Rx) is an HDBT 3.0 extender
based on the new generation of HDBT 3.0 platform,
which can transmit the
uncompressed HDMI2.0 video signal up to 4K@60Hz 4:4:4.
 Dante Ready
Dante Ready
Supports one RJ-45 port for 2x2 Dante.
 Dual Fully-featured USB C
Dual Fully-featured USB C
supports 4K video, USB 3.2 data, USB ethernet and 60W charging.
It provides power delivery (PD) of up to 60 W for the connected device
(e.g. BYOD laptop or smartphone).
Download
  • INFOBIT iSwitch 402UC Datasheet V1.0.pdf
    2.83M
    2024-09-29
  • 2-INFOBIT iSwitch 402UC User Manual V1.0.pdf
    10.9M
    2024-09-29
  • iSwitch 402UC Brochure V1.0.pdf
    1.59M
    2025-07-30
  • API Commands for iSwitch 402UC TX V1.9.pdf
    0.22M
    2025-08-01
  • iSwitch 402UC Rx API Commands V1.0.pdf
    0.14M
    2025-08-01
RELATED PRODUCTS
  • iSpeaker CM360
    128x MEMS microphone array 1x RJ45 Dante PoE port Supports both sound pickup and local sound reinforcement modes Supports 8x local pickup zones. Supports 8 meters pickup distance
  • iSpeaker DAC6S
    1x6.5"+1x1" dome Output power of 60W Rated power (8Ω fixed resistance): 60W Easy wiring: Front-out wiring cable raceway. Supports Dante
  • iSpeaker CS100
    Music/ human voice adjustable Rated power (4Ω): 100W Rated power (70V): 60W / 30W / 15W / 7.5W Rated power (100V): 30W / 15W / 7.5W / 3.7W Diffusion angle: 20° vertically, 120° horizontally
  • iCam VB80
    Wired screen presentation via USB-C (with DP) and HDMI Wireless BYOD via Airplay, Miracast and Dongle Wide angle 4K video camera with 120° FOV. 2x 8W Stereo full range speakers Auto Framing / Speaker Tracking / Presenter Tracking 
  • iSpeaker A20
    AI beam-forming algorithm For full duplex calls, echo cancellation Max voice pickup range could be 100㎡ Plug and play, with tidy cable management Effective pickup radius 10m
  • AOC-USB31-CCDV-xx
    Support USB 3.1 Gen2 Support USB 2.0 high-speed and full speed Support adaptive 4-Lan DP1.2 + USB 2.0 Adaptive 2-lane DP 1.4 + USB 3.1 Gen2 10Gpbs Plug and play without driver dependent High reliability Thinner, lighter, and softer than conventional copper cable Highly resistant to EMI and RFI USB 3.2 Gen 2 compliant with SuperSpeed+ transfer rates up to 10 Gbps USB-C compliance with DisplayPort 1.4 Alternate Mode (DP Alt Mode) for resolutions up to 8K@60Hz or 4K120Hz on supported devices and displays Supports pass-through of EDID and HDCP-encrypted signals. Ultra-flexible, ultra-thin 5.2mm diameter cable — a narrow bend radius facilitates easier installation and reduces the possibility of cable damage. Bidirectional USB power flow: When connected to USB devices that support USB PD (Power Delivery), power flows both ways, enabling both host and peripheral devices to provide power to the far-end device. Supports USB Power Delivery (PD) and Quick…
  • iCable USB4
    USB C to C male, with E-Marker 240W or 60W Power Delivery 40 Gbps length: 0.5m, 1.2m 20 Gbps length: 2m, 4m, 5m Support Thunderbolt 3
  • iCable USB 3.0 AM/BM
    True Plug–and–Play SuperSpeed USB 3.0 data transfer rate up to 5Gbps USB A Male to USB B Male Pulls power from the source side Available lengths: 5m, 10m, 15m Order Code: iCable USB-ACCxx-AB
LEAVE MESSAGE

Get in touch with INFOBIT team!