iSwitch-2000D--B0-1
iSwitch 2000D (Dante)

HDMI 4K60 AV over IP w/ Dante

SDVoE

SDVoE

4K60

4K60

KVM

KVM

Matrix

Matrix

Video Wall

Video Wall

Dante

Dante

iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)

18Gbps, HDMI 2.0b, HDCP 2.2 compliant

Both Input and output video resolution is up to 4K60 4:4:4

Up to 328ft / 100m via CAT5E/6/6A/7 cable

Transmit video, analog/digital audio, IR, RS-232, CEC and USB over Ethernet

Integrate both Copper and Fiber ports redundancy

ARC/eARC/SPDIF/Analog audio return function

Channel configuration via front panel buttons and LED screen

Built-in two-channel RELAY ports and two-channel I/O ports for contact control

Support unicast and multicast functions

Support point-to-point, video matrix, and video wall functions (video wall supports up to 9×9)

Intelligent video wall group management

Support MJPEG Substream real-time preview

1G Ethernet Switch, PoE

Built-in Web-GUI control, Telnet, and SSH as well

Support Dante audio

Smart networking design for easy and flexible installation

iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
iSwitch 2000D (Dante)
 Dante Ready
Dante Ready
The iSwitch 200D Tx/Rx is automatically discovered and ready to use when connected, and no separate power supplies are required – just use a common PoE (Power over Ethernet) switch. Comatible with INFOBIT Dante speakers.
 Point-to-Point
Point-to-Point
iSwitch AV over IP products are a direct replacement for AV Matrix (HDbaseT) solutions. Leverage IP infrastructure to route AV signals in offices, huddle rooms, conference rooms, or as content contribution (trunking) between locations. True plug-and-play, no need any IP settings.
 One-to-Many
One-to-Many
iSwitch efficiently deliver high-quality, low latency, AV to many displays on a floor, between floors, or across the entire organization.
 Many-to-One Switching
Many-to-One Switching
iSwitch lets you take content from multiple encoders and deliver it to one decoder connected to the same managed Ethernet switch.
 Many-to-Many Video Wall
Many-to-Many Video Wall
iSwitch include video wall processing that allows encoded AV content to be presented across an array of displays.
 Many-to-Many Matrix Switching
Many-to-Many Matrix Switching
Digital signage systems are usually asymmetrical – a few sources feeding a large number of destinations.
iSwitch simply integrates decoder and network drop for each display.
 Preview Source
Preview Source
With preview of all signal content.
 Support portrait layouts
Support portrait layouts
It supports 90°, 180°, 270° screen installation.
Datasheet
Model iSwitch 2000D
Name HDMI 4K60 AV over IP w/ Dante
HDMI Compliant HDMI 2.0b
HDCP Compliant HDCP 2.2
Video Bandwidth 18Gbps
Video Compression Standard JPEG2000
Video Network Bandwidth 1G
Video Resolution Up to 4K@60Hz 4:4:4
Color Depth Input: 8/10/12-bit Output: 8-bit
Color Space RGB 4:4:4, YCbCr 4:4:4 / 4:2:2 / 4:2:0
HDMI Audio Formats LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD
Master
Transmission Distance 100M CAT5E/6/6A/7
IR Level Default 12V, optional 5V
IR Frequency Wideband 20K – 60KHZ
ESD Protection Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
iSwitch 2000D-T (Tx) Input:
1x HDMI IN [Type A, 19-pin female]
1x L/R AUDIO IN [3-pin 3.81mm Phoenix connector]
Output:
1 x HDMI OUT [Type A, 19-pin female]
1x L/R AUDIO OUT [3-pin 3.81mm Phoenix connector]
1x SPDIF OUT [Optical audio connector]
Control:
1x RS-232 [3-pin 3.81mm Phoenix connector]
1x LAN (POE) [RJ45 jack]
1x FIBER [Optical fiber slot]
1x USB 2.0 HOST [Type B, 4-pin female]
2x USB 2.0 DEVICE [Type-A, 4pin female]
2x RELAYS [3.81mm Phoenix connector]
2x DIGITAL IO [3.81mm Phoenix connector]
1x IR IN [3.5mm Audio Jack]
1x IR OUT [3.5mm Audio Jack]
iSwitch 2000D-R (Rx) Input:
1x SPDIF IN [Optical audio connector]
1x L/R AUDIO IN [3-pin 3.81mm Phoenix connector]
Output:
1x HDMI OUT [Type A, 19-pin female]
1x L/R AUDIO OUT [3-pin 3.81mm Phoenix connector]
Control:
1x RS-232 [3.81mm Phoenix connector]
1x LAN (POE) [RJ45 jack]
1x FIBER [Optical fiber slot]
2x USB 1.1 DEVICE [Type-A, 4-pin female]
2 x USB 2.0 DEVICE [Type-A, 4-pin female]
2 x RELAYS [3.81mm Phoenix connector]
2x DIGITAL IO [3.81mm Phoenix connector]
1 x IR IN [3.5mm Audio Jack]
1x IR OUT [3.5mm Audio Jack]
Housing Metal enclosure
Color Black
Dimensions Encoder/Decoder: 204mm [W] x 136mm [D] x 25.5mm [H]
Weight Encoder: 631g, Decoder: 626g
Power Supply Input: AC100 – 240V 50/60Hz, Output: DC 12V/2.5A (US/EU standards, CE/FCC/UL certified)
Power Consumption Encoder: 8.52W, Decoder: 7.08W (Max.)
Operating Temperature 32 – 104°F / 0 – 40°C
Storage Temperature -4 – 140°F / -20 – 60°C
Relative Humidity 20 – 90% RH (no condensing)
Resolution / HDMI Cable Length 4K60: 5m; 4K30: 10m; 1080p: 15m
Download
  • iSwitch 2000D User Manual_V1.1.pdf
    1.03M
    2024-09-02
  • iSwitch 2000D-C Controller User Manual_V1.0.pdf
    1.75M
    2024-09-02
LEAVE MESSAGE

Get in touch with INFOBIT team!