Eigenschaften three Ethernet ports, any of which can be used to transmit A/V streams, control data, and Dante audio streams.
Supports input and output resolutions up to 3840 × 2160 @ 60 Hz, 4:4:4.
Unterstützt video walls up to 16 × 16.
Unterstützt HDR10 und Dolby Vision.
Unterstützt CEC one-touch-play and standby commands for powering displays on/off, as well as CEC Frames.
Unterstützt multi-channel audio up to PCM 7.1, Dolby Atmos, DTS-HD Master Audio, and DTS:X.
Unterstützt HDMI eARC audio return.
Provides analog Audio-Enteinbettung.
HDCP 2.2/2.3
Flexible routing of audio, video, USB, RS-232, and IR signals independently or together throughout the matrix system.
Extends audio, video, USB, RS-232, IR, and power signals up to 328 ft (100 m) over a single Cat 5e (or higher) cable.
Provides 1-frame latency.
Unterstützt bidirektionaler RS-232
Unterstützt bidirectional IR passthrough for controlling remote source and display devices between encoders and decoders.
Unterstützt IR generation, allowing IR codes to be sent via API.
Eigenschaften dual USB engines for high-performance USB 2.0 over IP, enhanced camera support, and seamless KM over IP switching and roaming.
Unterstützt point-to-point, point-to-multipoint, multipoint-to-point, and multipoint-to-multipoint
Unterstützt PoE+, allowing the unit to be powered by compatible power sourcing equipment, such as a PoE-enabled Ethernet switch, eliminating the need for a local power adapter.
Provides “Fit In” and “Stretch Out” modes for video wall processing, as well as video rotation management. Decoded video can fill a video wall, maintain aspect ratio, and rotate 180° and 270° clockwise to meet various display requirements.
Unterstützt DHCP by default and falls back to Auto-IP if no DHCP server is detected.
Supports control via Telnet API or an IP controller (iSwitch 2000-CTL).
Unterstützt Telnet, SSH, HTTP, and HTTPS
Unterstützt 2-channel Dante receive and 2-channel Dante transmit audio streams when Dante is licensed (default: Dante unlicensed).
