iControl KE101--B0
iControl KE101

Relay & Serial Ports Expansion Box

iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101

Relay & Serial Ports Expansion Box.

1x 100M Ethernet port, supporting TCP/UDP communication protocol.

1x I/O port, supporting digital input or digital output.

1x IR output port, supporting 20KHz~60KHz carrier output.

1x RS-232/RS-485 bidirectional serial port, used to control matrix, projector, or other audio and video devices.

2x low-voltage relays, used to control lighting, access control, curtains, etc.

Built-in web server, allowing users to access web pages through web browser to configure the device.

Dual power supply modes, supporting DC (12-24V) or PoE power supply.

Built-in API commands, used to set devices.

Unterstützung der Fabrik-Reset.

iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
iControl KE101
Datenblatt
Modell iControl KE101
Name Relay & Serial Ports Expansion Box
Technische
RS-232 Support full duplex communication mode
RS-485 Support half-duplex communication mode
Baud Rate Support 2400, 4800, 9600, 14400, 19200, 38400, 56000, 57600 and 115200
LAN-Netzwerk 100M Ethernet interface
GPIO The detection accuracy can reach 10ms.
IR Support 5V IR Blaster cable
ESD-Schutz IEC 61000-4-2:
±8kV(Air-gap discharge)&±4kV (Contact discharge)
Verbindung
Eingang 1×LAN/PoE [RJ45,8-pin female, supporting PoE]
1x DC IN [2pin-3.81mm phoenix connector]
Ausgang 1x I/O&IR [3pin-3.81mm phoenix connector]
1x RS-485/RS-232[5pin-3.81mm phoenix connector]
1x RELAY [4pin-3.81mm phoenix connector]
Mechanische
Wohnung Mental Enclosure
Farbe schwarz
Dimension 95mm [W]×68mm [D]×17mm [H]
Gewicht 180g
Stromversorgung Input: AC 100-240V 50/60Hz
Output: DC 12-24V/1A
Stromverbrauch 0.96W
Betrieb
Temperatur
0℃~40℃/32F~104°F
Lagertemperatur -20℃~60℃/-4°F~140°F
Betriebsfeuchte 20%~80% (Relative Humidity,non-condensing)
Lagerfeuchtigkeit 10%~90% (Relative Humidity,non-condensing)
Diagramm
Herunterladen
  • iControl KE101 User Manual_V1.0.pdf
    6.68M
    2026-11-17
Verwandte Produkte
  • DC 12V Stromversorgung und POE
    6,9-Zoll-Bedienfeld ARM Cortex-A55 Architektur 1,8Ghz Hauptfrequenz. Android 11.0 System, 4GB DDR4 RAM, 32GB EMMC Flash. 9-Zoll 1440 * 720 (1: 1) Auflösung, kapazitiver Touchscreen, Standard UK Box Wall-in Design. Eine Maschine mit zwei Modi kann als Touchscreen-Zentralsteuerung oder als Benutzerterminal verwendet werden. Unterstützung eines RS-232 seriellen Kommunikations-Anschlusses, Konfiguration von 8 Baud-Raten im Bereich von 2400-115200bps. Unterstützen Sie den Zugriff auf die Host-System-Management-Webseite mit einem Passwort. Interface Design und Programmierung durch IDE Design Tools. Kompatibel mit Industriestandard-Netzwerkkommunikationsprotokollen (TCP/IP, HTTP, UDP, Websocket) Mit 1 Gigabit-Netzwerkport beträgt die höchste Rate bis zu 1G/bps. Doppelter Stromversorgungsmodus, unterstützt PoE- oder DC-Stromversorgung. Unterstützung der Fabrik-Reset.
  • iControl K06-US
    „iTrans OCS 181“ — INFOBIT AV
  • iControl K06-Deutschland
    Embedder / De-Embedder – INFOBIT AV
  • iControl K06-EU
    6 Tasten Steuertaste, EU-Version 6x programmierbare hintergrundbeleuchtete Tasten mit anpassbarem Etikett. Die Farbe jedes Buttons kann vom Benutzer angepasst werden. 1x Lautstärkeregelungsknopf 2x RS-232, 2x IR und 2x Relais zur Steuerung. Unterstützung TCP/IP-Steuerung Unterstützung IR-Lernfunktion Über benutzerfreundliche Web-GUI steuerbar und konfigurierbar Über PoE EU Wallplate-Version angetrieben
Nachricht hinterlassen

Kontaktieren Sie das INFOBIT Team!