iTrans DX-T-22

Compact design, easy to use, support hot-swappable.

Conversion between analog audio and Dante digital audio signals.

Built-in 2 input audio channels.

Extend audio, control, Ethernet, and power with Cat cable.

One network cable instead of multiple analog or multi-core cables, is economical, efficient, and versatile.

Extend uncompressed high-quality audio signals with near-zero delay.

Safe and reliable transmission of high-quality two-channel audio

Supports Dante software, which can easily expand and configure network and audio routing.

It supports PoE

Chat Now

All Dante

The iTrans DX-T-22 Analog Adapters let you use your favorite analog audio gear with any Dante- connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost effective, compact and built for the road, it brings the modern network connectivity that every audio pro needs in their toolbox.

Analog Input

Connect legacy mixers and consoles to a Dante network.
Patch favorite DSPs, analog compressors and equalizers
into a Dante system using a combination of Input and Output adapters.
Connect stage DI boxes and keyboard instruments directly to
a Dante network.
Connect your wireless mic receiver to a Dante network

Datasheet

Model	iTrans DX-T-22
Name	2CH XLR to Dante Analog Transmitter
Channel	2 ch analog Inputs, 2 ch Dante output
Frequency response	20Hz to 20kHz (-/+0.5dB)
Bit depth	24 bit
Impedance	20k Ohm(Balanced); 10k Ohm(unbalanced)
Dynamic Range	> 100dB
SNR(Signal to Noise Ratio)	> 100dB
THD (total harmonic distortion)	< 0.01%（+4dBu）
Connector	1x RJ45 and 2x XLR-F
Power Supply	Class 1 802.3af PoE
Sampling rate	44.1, 48, 96 kHz
Latency	Depending on the configuration on the device or network, 1 ms (default)
Network transmission	Dante IP AES67 RTP audio
Weight	Gross Weight: 0.75KG
Dimension	4.92 x 1.30 x 1.10 inch/ 125 x 33 x 28 mm (L x W x H)
Power consumption	2 Watts
Operation temperature	0~50OC [32~122F]
Storage temperature	-20~60OC [-4~140F]
Relative humidity	20~90% RH [no condensation]

Download

INFOBIT iTrans DX-T-22 Datasheet-V2.0.pdf

0.36M

2026-02-25
INFOBIT AV DX-T-22 Quick Guide-V2.0.pdf

0.3M

2026-02-25

Related Products

iTrans DX-R-22
Built-in 2 output audio channels. Extend audio, control, Ethernet, and power with Cat cable. Extend uncompressed high-quality audio signals with near-zero delay. Compact design, easy to use, support hot-swappable. Supports Dante software, which can easily expand and configure network and audio routing.

DETAILS
iTrans DP-T-22
Balanced/unbalanced audio input Audio sampling rate supports 44.1kHz, 48kHz and 96kHz (24bit) AES67 RTP audio transmission Audio input supports 3-level gain adjustment: +18dBu, 0dBu (default) and -10dBV DC 12V power supply and POE

DETAILS
iTrans DP-R-22
Balanced/unbalanced audio output Audio sampling rate supports 44.1kHz, 48kHz and 96kHz (24bit) Dante solution supports AES67 RTP audio transmission Audio output supports 3-level gain adjustment: +18dBu, 0dBu (default) and -10dBV DC 12V power supply and POE function

DETAILS
iTrans DX-22-US
2x Inputs + 2x Outputs (Dante® in and Dante® out) Balanced/unbalanced XLR analog audio MIC Phantom 48V Power and on/off via a hard button Input sensitivity and output gain control to adjust for different levels of MIC/XLR Dante® audio sampling rate supports 44.1/48/88.2/96KHz@24bit Configurable Dante® device latency (supports 1, ,2 or 5ms configurable using Dante® Controller) Supports AES67 RTP audio transport PoE & local power options Standard 2-GANG US faceplate design

DETAILS
iTrans DX-22-EUK
2x Inputs + 2x Outputs (Dante® in and Dante® out) Balanced/unbalanced XLR analog audio MIC Phantom 48V Power and on/off via a hard button Input sensitivity and output gain control to adjust for different levels of MIC/XLR Dante® audio sampling rate supports 44.1/48/88.2/96KHz@24bit Configurable Dante® device latency (supports 1, ,2 or 5ms configurable using Dante® Controller) Supports AES67 RTP audio transport PoE & local power options Standard 2-GANG EU/UK faceplate design

DETAILS
iTrans DU-TR-22B
Compliant with USB 2.0 Full-Speed Operation Compliant with USB Audio Device Class Specification V1.0 Analog sound card, supporting MIC input and SPK output Audio sampling rate supports 44.1kHz, 48kHz and 96kHz (24bit) Dante solution supports AES67 RTP audio transmission

DETAILS
iTrans DU-TR-22C (v2)
USB C Dante Converter 1 x Type-C to Type-C cable 1 x Type-C to Type-A cable 2X2 audio channels 24-bit audio support Plug and Play 802.3af PoE

DETAILS
iTrans DB44-US
Dante 4x3 wall panel with Bluetooth. One-key pairing with back-lit indication; Supports Bluetooth 5.3, compliant with V5.0/4.0/2.1+EDR Transmission distance without obstruction: up to 20m. Compatible with most smartphones, Apple iPads, and Android tablets. Controllable by Web-UI, Dante Controller, or Dante Director software. Supports API for the central control. Powered by a network switch via PoE (IEEE 802.3af). Support Bluetooth ID rename. US 2-Gang version

DETAILS

LEAVE MESSAGE

Get in touch with INFOBIT team!