iTrans UC-F300

Compliant with USB Type-C DisplayPort Alternative Mode

Video resolution is up to 4K2K@50/60Hz 4:4:4

Compliant with HDCP2.2/2.3 and 1.x

Support HBR3, HBR2, HBR and RBR (8.1/5.4/2.7/1.62Gbps)

Support any VESA standard resolution transmission

HDR10, HDR10+, Dolby Vision, HLG pass-through

Support LPCM 7.1CH, Dolby 5.1, Dolby TrueHD, Dolby Atmos and DTS-HD Master, DTS:X Audio

Transmission distance is up to 10km over a single-mode fiber cable

Multi-mode fiber is supported in SFP modules. The distance over OM4 is up to 300m

EDID transmission from receiver to transmitter

Conception compacte pour une installation facile et flexible

Can be mixed with iTrans DH-F300 Tx/ Rx

Chat maintenant

Mixed Connection

The iTrans UC-F300 can be mixed with the iTrans DH-F300, either Tx or Rx.
Flexible connection no matter USB-C, DP or HDMI ports.

Fiche de données

Modèle	iTrans UC-F300
Nom	4K60 USB-C Over Fiber Extender
USB-C Compliance	USB Type- 1.1 Display Port ALT Mode
HDCP compliance	HDCP 2.3/2.2/1.x
Bande passante vidéo	32.4Gps (8.1/5.4/2.7/1.62bps)
Input & Output Video Resolution	4096×2160p/60/50, 3840×2160p/60/50/30/25, 1920x1200p/60, 1920x1080p/60/50, 1360×768p/60, 1280x800p/60, 1280×720p/60/50, 1024×768p/60 Any VESA resolution is supported.
Espace de couleur	RGB, YCbCr 4:4:4/ 4:2:2, YUV 4:2:0
Profondeur de couleur	8 bits, 10 bits, 12 bits
Formats audio	LPCM, Dolby Digital/Plus EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DTS: X
Fiber Optic	10G SFP+ module
Distance de transmission	Up to 10km over a single-mode fiber cable Up to 300m over multi-mode OM4 fiber cable
Protection ESD	IEC 61000-4-2: ±8kV (décharge entre l ' espace aérien) & ±4kV (décharge de contact)
émetteur	Entrée : 1x IN [USB-C, 24-pin female] 1x SERVICE [USB-C, update port] Sortie : 1x SFP+OUT [LC female]
Récepteur	Entrée : 1x SFP+IN [LC female] 1x SERVICE [USB-C, update port] Sortie : 1x OUT [USB-C, 24-pin female]
Logement	Boîtier en métal
Couleur	noir
Dimensions	Transmitter or Receiver: 81×49×25mm, WDH
Poids	Transmitter or Receiver: 138g
Alimentation électrique	Entrée: AC 100 – 240V 50/60Hz Output: DC 5VIA (Normes américaines/européennes, certifiées CE/FCC/UL)
Consommation d'énergie	Transmitter: 2.7W (Max), Receiver: 2.5W (Max)
Température de fonctionnement	32°F – 104°F /0°C – 40°C
Température de stockage	-4°F-140°F/-20°C -60°C
Humidité de fonctionnement	20%-80% (relative non-condensing)
Humidité de stockage	10%-90% (relative non-condensing)
Mix with iTrans DH-F300	Oui

Diagramme

Télécharger

iTrans UC-F300 User Manual V1.0.pdf

2.21M

2025-12-18
iTrans UC-F300 and DH-F300 Diagrams V1.0.pdf

0.55M

2025-12-25

Produits connexes

iTrans DH-F300
4K60 DP+HDMI over Fiber Extender DisplayPort/HDMI™ combo connector (HDDP) supports both DisplayPort and HDMI™ video interfaces Compliant with HDCP 2.3, DisplayPort 1.4 ALT Mode Video bandwidth 8.1/5.4/2.7/1.62Gbps (DP) and 18Gbps (HDMI™) Video resolution is up to 4K@60 Support any VESA standard resolution transmission Automatic recognition of DP/HDMI™ on input and output ports Four conversions of DP/HDMI™ are supported: DP to DP, DP to HDMI™, HDMI™ to DP, HDMI™ to HDMI™ Transmission distance up to 10km over a single-mode fiber optic cable * Multi-mode fiber is supported in SFP modules. The distance over OM4 is up to 300m Support LPCM 7.1CH, Dolby 5.1, Dolby TrueHD, Dolby Atmos, and DTS-HD Master, DTS:X Audio HDR10, HDR10+, Dolby Vision, HLG pass-through EDID transmission from Receiver to Transmitter Compact design for easy and flexible installation Can mix connection with iTrans UC-F300

Détails
iTrans F1000
Extenseur de fibre optique HDMI 4K60 18Gbps avec extraction audio HDMI 2.0b, HDCP 2.2 et DVI 1.0 compatible Résolution vidéo jusqu'à 4k2k@50 60 Hz 4:4:4 Jusqu'à 10 km (via câble fibre monomode) Le récepteur prend en charge l'extraction audio

Détails

Laisser un message

Contactez l'équipe INFOBIT !